- +1 303 666 9020
- Set Your Vehicle
2001 Wrangler TJ, 3.55 Gear Ratio, Dana 30, without ABS
Fits 1997-2006 Wrangler TJ, 2004-2006 Wrangler LJ Unlimited, 2000-2001 Cherokee XJ
Will bolt into any Cherokee XJ or Comanche MJ from 1984-1999 as well however these axles were High Pinion vs the Low Pinion the above years came factory with
Good Shape, Straight, No Rot or rusted out mounts, Gears inspected, fluid was clean, We recommend replacing seals as they are not warrantied but there was no apparent leaks and fluid level was good
Please login to write review!
Genuine OEM Jeep NP231J Command-Trac transfer case with 23-spline long input shaft (1.55" exposed length) and an installed Heavy-Duty Slip Yoke Eliminator (SYE) Kit. OEM part number 52099211. Fits 1997-2002 Jeep Wrangler TJ 4.0L 6-cylinder and 2.5L automatic applications with suspension lifts requiring a fixed yoke setup. Fully inspected and tested prior to vehicle dismantle.
Genuine OEM Jeep NP231J Command-Trac transfer case with 23-spline input, OEM part number 52105886AC. Fits applicable 1997-2006 Jeep Wrangler TJ and 1998-2001 Jeep Cherokee XJ 4.0L applications. Fully inspected prior to vehicle dismantle and ready for installation. Direct OEM and industry interchange numbers apply.
This OEM Rubicon Rock-Trac 4:1 transfer case is a low-mileage take-out with less than 1,000 miles on it. Pulled from a Jeep Wrangler JL / Gladiator JT, it features an America's Most Wanted 4x4 transmission adapter for a Hemi swap, which can be easily removed if you prefer to use it as a standard stock factory transfer case.
This OEM Dana 300 complete wiring harness pigtail was pulled from a Jeep CJ. It has been inspected to ensure it is in good working condition, with intact connectors and wiring, and is ready for installation.
0 Reviews For TJ LJ XJ Front Axle Assembly Dana 30 With 3.55 Gear Ratio without ABS 97-06 Tagged 52099199